20-8
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing Virtual Connection Properties
Table 20-3 ATM Virtual Connection Cross-Connect Properties
Field Description
In Port Incoming port for the cross-connect.
In VC Incoming virtual connection for the cross-connect.
You can view additional details about the virtual connection in the following
ways:
• Click the hyperlinked entry to view the VC table.
• Right-click the entry, then choose Properties to view information about the
incoming and outgoing VCIs, VPI, service category, and traffic descriptors.
Out Port Outgoing port for the cross-connect.
Out VC Outgoing virtual connection for the cross-connect.
You can view additional details about the virtual connection in the following
ways:
• Click the hyperlinked entry to view the VC table.
• Right-click the entry, then choose Properties to view information about the
incoming and outgoing VCIs, VPI, service category, and traffic descriptors.
In VC Ingress
Traffic Descriptor ATM traffic parameters and service categories for the incoming traffic on the
incoming VC cross-connect.
For information on VC traffic descriptors, see Table 20-4.
In VC Egress
Traffic Descriptor ATM traffic parameters and service categories for the outgoing traffic on the
incoming VC cross-connect.
For information on VC traffic descriptors, see Table 20-4.
Out VC Egress
Traffic Descriptor ATM traffic parameters and service categories for the outgoing traffic on the
outgoing VC cross-connect.
For information on VC traffic descriptors, see Table 20-4.
Out VC Ingress
Traffic Descriptor ATM traffic parameters and service categories for the incoming traffic on the
outgoing VC cross-connect.
For information on VC traffic descriptors, see Table 20-4.