25-100
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the Policy Configuration Details
To view the Policy configuration details for a PDSN service:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > PDSN > PDSN
service > Policy. The details are displayed in the content pane.
Table 25-62 displays the Policy configuration details.
Viewing the PPP Configuration Det4
To view the Point-to-Point Protocol details for a PDSN service:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > PDSN > PDSN
service > PPP. The details are displayed in the content pane.
Table 25-63 displays the PPP configuration details.
Table 25-62 Policy Configuration Details
Field Description
Unknown CVSE Policy Indicates whether the unknown Critical Vendor Specific Extension (CVSE)
policy is enforced.
RRQ MEI From Current
PCF Indicates whether PPP must be restarted after getting MEI in RRQ.
New Call Policy The call policy for one or all the services, which can be any one of the
following:
Accept
Reject
Redirect
Reject on MSID
Redirect on MSID
None
This field defaults to None.
Overload Policy The action to be taken by the PDSN service in case of an overload condition.
Overload Policy Reject
Code The reject code for the overload policy.
Service Option Policy The policy followed by PDSN for configuring services.
Reject MSID The Mobile Station Identifier (MSID) for which new calls are rejected.
Note If the New Call Policy field is set to Reject MSID, then this field
will display the relevant MSID.