12-50
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Working with VLANs
Figure 12-24 Edge EFPs Displayed Inside and Outside of Switching Entities
You can delete EFPs and switching entities that have a reconciliation icon by right-clicking them and
choosing Delete. After all switching entities and EFPs are deleted from a network VLAN, the empty
network VLAN is automatically deleted from Prime Network Vision after a few minutes.
Switching Entities Containing Termination Points
For some devices, such as Cisco 7600 series, Cisco GSR, and Cisco ASR 9000 seri es devices, the related
switching entities can contain Ethernet flow point elements that serve as termination points on di fferent
network VLANs. If a single map contains both the switching entities and the network VLANs, a link is
displayed between them.
Adding and Removing VLANs from a Map

Adding VLANs to a Map

You can add VLANs to a map if the VLANs were previously discovered by Prime Network Vision and
are not currently displayed in the map.
Note Adding VLANs affects other users if they are working with the same map.
To add VLANs to a map:
Step 1 In Prime Network Vision, display the map to which you want to add the VLANs.