20-10
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing Virtual Connection Properties
Viewing ATM VPI and VCI Properties
If you know the interface or link configured for virtual connection cross -c onnec ts, you can view ATM
VPI and VCI properties from the physical inventory window or from the link properties window.
To view ATM VPI and VCI properties, open the VC Table window in either of the following ways:
• To open the VC Table window from physical inventory:
a. In the map view, double-click the element configured for virtual connection cro ss-c on nect s.
b. In the inventory window, choose Physical Inventory > Chassis > Slot > Subslot > Port.
c. Click Show VC Table.
• To view the VC Table window from the link properties window:
a. In the map or links view, right-click the required ATM link and choose Properties.
b. In the link properties window, click Calculate VCs.
c. After the screen refreshes, click either Show Configured or Show Misconfigured to view the
virtual connection cross-connects.
The VC Table window is displayed, as shown in Figure 20-5.
Figure 20-5 VC Table
Table 20-5 describes the information displayed in the VC Table window.