20-52
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing CEM and Virtual CEM Properties
Figure 20-27 CEM Group Properties Window
See Table 18-27 on page 18-51 for the properties displayed in the Pseudowire table in the CEM Group
Properties window.
Viewing CEM Groups on Virtual CEM Interfaces
When you configure a CEM group on a virtual CEM, the CEM group informati on is displayed below the
virtual CEM in logical inventory.
To view CEM groups on virtual CEM interfaces:
Step 1 In Prime Network Vision, right-click the required device, then choose Inventory.
Step 2 In the inventory window, choose Logical Inventory > Clock > Pseudowire Clock Recovery.
Step 3 In the Virtual CEM tab, right-click the CEM interface name and choose Properties. The CEM group
properties are displayed in a separate window (Figure 20-28). If a pseudowire is configured on the CEM
group for out-of-band clocking, the pseudowire VCID is also shown.