25-130
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
Working with Active Charging Service
Downlink Indicates whether downlink flow limit is configured for the subscriber or not.
Charging Action Bandwidth Direction
Direction Direction of the packet flow: Uplink or Downlink
Peak Data Rate Peak data rate configured for the uplink or downlink packet flow.
Peak Burst Size Peak burst size allowed for the uplink or downlink packets.
Committed Data Rate Committed data rate for the uplink or downlink packet flow.
Committed Burst Size Committed burst size allowed for the uplink or downlink packets.
Exceed Action Action to take on packets that exceed committed data rate but do not violate
the peak data rate.
Violate Action Action to take on packets that exceed both committed and peak data rates.
Bandwidth Limiting ID Identifier for bandwidth limiting.
Flow Action
Redirect URL Indicates whether packets matched to the rule definition must be redirected
to a specified URL or not.
Clear Quota Retry
Timer Indicates whether to reset the CCA quota retry timer for a specific subscriber
upon redirection of data packets.
Conditional Redirect Indicates whether packets matching to a configured user age nt m ust be
conditionally redirected to a specified URL.
Discard Discards packets associated with the charging action.
Random Drop Indicates whether to degrade voice quality and specify the time interval in
seconds at which the voice packets will be dropped.
Readdress Redirects unknown gateway traffic based on the destination IP address of the
packets to known or trusted gateways.
Terminate Flow Indicates whether to terminate the flow by terminating the TCP connection
gracefully between the subscriber and external server.
Terminate Session Indicates whether to terminate the session.
QoS
Traffic Class QoS traffic class for the charging action, which could be backgro und,
conversational, interactive, or streaming.
Class Identifier The QCI value.
Video
Bit Rate Bits per second, at which the TCP video flow must be paced during video
pacing.
CAE Readdressing Indicates whether Content Adaptation Engine (CAE) readdressing is
enabled, allowing video traffic to be fetched from the CAEs in the CA E
group.
Transrating Indicates whether transrating is enabled or not. Transrating is a m obile video
feature that reduces the encoded bit rates by adjusting video encoding.
Target Rate Reduction Percentage of the input bit rate of a video flow.
Billing Action
Table 25-78 Charging Action Properties in Logical Inventory (continued)
Field Description