26-2
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 26 Monitoring Data Center Configurations
User Roles Required to Work with Data Center Configurations
Prime Network supports the following technologies as part of data center:
Virtual Port Channel (vPC), page 26-3
Cisco FabricPath, page 26-7
Virtualization, page 26-11
Viewing the Storage Area Network Support Details, page 26-37
User Roles Required to Work with Data Center Configurations
Table 26-2 identifies the GUI default permission or device scope security level that is required to work
with Prime Network Vision. Prime Network Vision determines whether you are authorized to perform a
task as follows:
For GUI-based tasks (tasks that do not affect devices), authorization is based on the default
permission that is assigned to your user account.
For element-based tasks (tasks that do affect elements), authorization is based on the default
permission that is assigned to your account. That is, wheth er the element is in one of your assigned
scopes and whether you meet the minimum security level for that scope.
For more information on user authorization, see the Cisco Prime Network 4.0 Administrator Guide.
By default, users with the Administrator role have access to all managed elements. To change the
Administrator user scope, see the topic on device scopes in the Cisco Prime Network 4.0 Administrator
Guide.
Non Cisco Servers Dell Blade Server
IBM Blade Server (PowerEdge Servers)
IBM Blade Server (Intel Servers)
Table 26-1 Devices supported as part of Data Center (continued)
Device Type Device
Table 26-2 Default Permission/Security Level Required for the Data Center Configurations
Task Viewer Operator OperatorPlus Configurator Administrator
Viewin g Virtu al Po r t
Channel Configuration XXXXX
Viewin g vPC
Configuration XXXXX
Viewing Cisco
FabricPath
Configuration
XXXXX
Monitoring Cisco
FabricPath
Configuration
XXXXX
Viewing Virtual Data
Centers XXXXX