20-35
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services Network Clock Service Overview
Figure 20-19 Clock Service Properties
Table 20-20 describes the information displayed for clocking service.
Table 20-20 Clock Service Properties
Field Description
Clock Service Mode This field is not populated.
Network Clock Select
Mode Action to take if the master device fails:
• Non-revert—Do not use the master device again after it recovers from the
failure.
• Revert—Use the master device again after it recovers and functions
correctly for a specified amount of time.
• Unknown—The network clock selection mode is unknown.
Service Status Status of the system service:
• Initializing—The service is starting up.
• Down—The service is down.
• Reset—The service has been reset.
• Running—The service is running.
• Other—A status other than those listed.
Active Clock Source Current active clock source used by the device.
Hold Timeout How long the device waits be fore reevaluating the network clock entry. Values
can be from 0-86400 seconds, Not Set, or infinite.
Service Type Type of system service, such as Clock or Cisco Discovery Protocol.