14-12
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 14 Monitoring DWDM Properties
Viewing Performance Monitoring Configuration
Figure 14-4 Client DWDM PM Settings Properties Window
Table 14-6 describes the information displayed above the tabs in the Client DWDM PM Settings
Properties window and in each of the tabs.
Table 14-6 Client DWDM PM Settings Properties Window and Tabs
Field Description
Interval Type The performance monitoring interval, either 15 minutes or 24 hours.
Location Physical interface using the format rack/slot/module/port where:
• rack is the chassis number of the rack.
• slot is the physical slot number of the line card.
• module is the module number. A physical layer interface module (PLIM) is always 0. Shared
port adapters (SPAs) are referenced by their subslot number.
• port is the physical port number of the interface.
FEC PM Settings Tab
Type FEC performance monitoring parameter being tracked:
• EC-BITS—The number of bit errors corrected (EC-BITS) in the DWDM trunk line during the
performance monitoring time interval.
• UC-WORDS—The number of uncorrectable words (UC -W OR DS) d ete cte d in th e DWDM
trunk line during the performance monitoring time interval.
Threshold Threshold for the performance monitoring parameter.
TCA Whether TCA generation for the specified parameter on the DWDM controller is enabled or
disabled.