Cisco Systems 4 Adding a Link Using the Inventory Window

6-16
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 6 Working with Links
Adding Static Links
Figure 6-7 Create Static Link Window
Step 3 Select the required port on both the A Side device and the Z Side device.
Step 4 Click Create to validate the connection and create the new link.
A success message is displayed.
A warning message is displayed if any of the following apply:
• A validation check fails.
• The operation status of one port is Up and the other p ort i s D own.
• The selected ports are not of the same type.
• The Layer 2 technology type is not the same.
• One of the ports is part of another link.
Adding a Link Using the Inventory Window
Step 1 Open the inventory window for the required A Side device.
Step 2 In the navigation pane, navigate to the required port or LAG.
Step 3 Right-click the required port or LAG and choose Topology > Mark as A Side.
Step 4 Repeat Step 1 and Step 2 for the Z Side port or LAG.
Step 5 Right-click the required port or LAG and choose Topology > Mark as Z Side. A confirmation message
is displayed.