12-104
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Working with Pseudowires
You can also view the following configuration details for a PW-HE interface:
• Viewing PW-HE Configured as a Local Interface under Pseudowire, page 12-104
• Viewing PW-HE Generic Interface List, page 12-105
• Viewing PW-HE as an Associated Entity for a Routing Entity, page 12-105
• Viewing PW-HE as an Associated Entity for a VRF, page 12-105
Viewing PW-HE Configured as a Local Interface under Pseudowire
To view the local interface details:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Pseudowire. The list of Pseudowire
interfaces configured in Prime Network are displayed in the content pane. For more information on
Pseudowire properties, see Viewing Pseudowire Properties, page 12-93.
Table 12-42 PW-HE Interface Details
Field Description
Interface Name The unique name to identify the PW-HE interface.
Admin State The administrative state of the PW-HE, which can be any one of the
following:
• Up
• Down
Oper State The operational state of the PW-HE, which can be any one of the following:
• Up
• Down
IP Interface The IP interface for the PW-HE, which when clicked will take you either to
the associated VRF interface site under the VRF node or the associated IP
Interface under the Routing Entity node.
Pseudowire The pseudowire to which the PW-HE is associated with, which when clic ked
will take you to the Pseudowire node.
Generic Interface List The generic interface list linked to the PW-HE, which when clicked will tak e
you to the relevant node under the PW-HE Generic Interfaces Lists node.
MTU The maximum number of transmission units (in bytes) for the PW-HE
interface.
Bandwidth The bandwidth (in kbits) for the PW-HE interface.
MAC Address The MAC address specified for the PW-HE interface, which is generally in
the xxx.xxx.xxx format.
Label The MPLS label for the PW-HE interface.
L2 Overhead The layer 2 overhead (in bytes) configured on the PW-HE interface, which
can be any value between 0 and 64. This field defaults to 0.