28-10
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 28 Monitoring ADSL2+ and VDSL2 Technology Enhancements
User Roles Required to Work with ADSL2+/VDSL2 Technologies
Viewing the One-to-One Access Profile
To view the One-to-One access profile details, expand the logical inventory and choose One-to-One
Access Profiles.
Figure 28-4 One-to-One Access Profile
Table 28-5 describes the N-to-One Access Profile details.
Table 28-5 N-to-One Access Profiles
Field Description
Table Types The type of access profile, which in this instance is One-to-One Access Profile.
One-to-One Access Profiles
Profile Name The name of the One-to-one access profile.
Input Service
Policy The name of the service policy that is assigned to the access profile as an input policy.
This is a rate-limiting policy that controls and limits all unicast incoming traffic from
the B6 card to the subscriber.
Output Service
Policy The name of the service policy that is assigned to the access profile as an output polic y .
This is a rate-limiting policy that controls and limits all unicast outgoing traffic to the
B6 card from the subscriber.
S-Vid The unique Subscriber VLAN identification code. This code can be any value between
2 and 122.
Priority Map The name of the 802.1p priority map, which is available in the DSCP-to-DOTP
mapping profile.
Maximum
Priority The maximum 802.1 priority level.
Priority The 802.1 priority level configured and applied to the incoming S-VID packet. This
level can be any value between 0 and 6.