15-17
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 15 Monitoring Ethernet Operations, Administration, and Maintenance Tool Properties Viewing Link OAM Properties
Step 4 To view Link OAM status in physical inventory, choose Physical Inventory > chassis > slot > interface.
The Link OAM administrative status is displayed as shown in Figure 15-10.
Dying Gasp Action Action that occurs when an unrecoverable condition is encountered.
Critical Event Action Action that occurs when an unspecified vendor-specific critical
event occurs.
Mode Mode of the interface: Active or Passive.
Unidirection Status of unidirectional Ethernet on the local interface: Su ppor ted
or Not supported.
Link Monitor Status of link monitoring on the local interface: Supported or Not
supported.
Remote Loopback Status of remote loopback on the local interface: Supported or Not
supported.
Loopback Status Status of loopback on the local interface: Supported or No
loopback.
Remote Client
MAC Address MAC address for the remote client.
Vendor Vendor of the remote client.
Mode Mode of the remote client: Active or Passive.
Unidirection Status of unidirectional Ethernet on the remote client interface:
Supported or Not supported.
Link Monitor Status of link monitoring on the remote client interface: Supported
or Not supported.
Remote Loopback Status of loopback on the remote client interface: Su pporte d or N ot
supported.
Table 15-12 Link OAM Data Properties Window (continued)
Field Description