18-50
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
Step 2 In the logical inventory window, choose Logical Inventory > MPBGPs > MPBGP.
Step 3 Click the Cross VRFs tab.
Step 4 Double-click the required entry in the list of cross-VRFs.
The Cross VRF Properties window is displayed, containing the information described in Ta b le 1 8-26 .
Viewing Pseudowire End-to-End Emulation Tunnels
The Pseudowires branch in logical inventory displays a list of the Layer 2 tunnel edge properties (per
edge), including tunnel status and VC labels.
To view pseudowire properties:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Pseudowires.
The Tunnel Edges table is displayed and contains the information described in Ta b le 1 8 -27 .
Table 18-26 Cross-VRF Properties Window
Field Description
Name Cross-VRF name.
Cross VRF Routing Entries Table
Destination IP address of the destination network.
Prefix Length of the network prefix in bits.
Next Hop IP address of the next hop in the path.
Out Going VRF Outgoing VRF identifier, hyperlinked to its entry in logical inventory.
Out Tag Outgoing virtual router tag, such as 50 or no tag.
In Tag Incoming virtual router tag, such as 97 or no tag.