14-15
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 14 Monitoring DWDM Properties Configuring and Viewing DWDM
Configuring and Viewing DWDM
The following commands can be launched from the inventory by right-clicking the a ppropriate node and
selecting Commands. Before executing any commands, you can preview them and view the results. If
desired, you can also schedule the commands.
The table below lists the configuration commands and the supported network elements. Before executing
any commands, you can preview them and view the results. If desired, you can also s chedu l e t he
commands.
For details on the software versions Prime Network supports for thes su ppo rted n etwor k el eme nts, se e
the Cisco Prime Network 4.0 Supported Cisco VNEs. To run the Carrier Grade NAT commands, the
software on the network element must support the Carrier Gr ad e NAT technology.
Type (cont.) ses-pm-fe—Far-end path monitoring severely errored seconds (SES-PM). Indicates the
severely errored seconds recorded in the OTN path during the performa nce mo nit oring t ime
interval.
ses-pm-ne—Far-end path monitoring severely errored seconds (SES-PM).
ses-sm-fe—Far-end section monitoring severely errored seconds (SES-SM). Indicates the
severely errored seconds recorded in the OTN section during the performance monitoring time
interval.
ses-sm-ne—Near-end section monitoring severely errored seconds (SES-SM).
sesr-pm-fe—Far-end path monitoring severely errored seconds ratio (SESR-PM). Indicates
the severely errored seconds ratio recorded in the OTN path during the performance
monitoring time interval.
sesr-pm-ne—Near-end path monitoring severely errored seconds ratio (SESR-PM).
sesr-sm-fe—Far-end section monitoring severely errored seconds ratio (SESR-SM). Indicates
the severely errored seconds ratio recorded in the OTN section during the performance
monitoring time interval.
sesr-sm-ne—Near-end section monitoring severely errored seconds ratio (SESR-SM).
uas-pm-fe—Far-end path monitoring unavailable seconds (UAS-PM). Indicates the
unavailable seconds recorded in the OTN path during the performance monitoring time
interval.
uas-pm-ne—Near-end path monitoring unavailable seconds (UAS-PM).
uas-sm-fe—Far-end section monitoring unavailable seconds (UAS-SM). Indicates the
unavailable seconds recorded in the OTN section during the performance monitoring time
interval.
uas-sm-ne—Near-end section monitoring unavailable seconds (UAS-SM).
Threshold Threshold configured for the parameter.
TCA If enabled, indicates a TCA is generated if the value of the parameter crosses the threshold during
the performance monitoring period. If disabled, TCAs are not generated if the value crosses the
threshold.
Table 14-6 Client DWDM PM Settings Properties Window and Tabs (continued)
Field Description