20-19
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services Viewing Channelization Properties
Table 20-11 describes the information that is displayed for SONET/SDH and OC3 in the co nten t pa ne .
Step 3 To view additional information about a channelized path, double-click the required entry in the
Description column. The SONET/SDH High Order Path Properties window is displayed as shown in
Figure 20-10.
Table 20-11 SONET/SDH and OC3 Properties
Field Description
SONET/SDH High Order Path (HOP) Area
Description SONET/SDH path description including the interface and high order
path. Double-click an entry to view additional details about the path.
Channelization Type of channelization, such as STS-1 or STM-1.
Admin Status Administrative status of the HOP.
Oper Status Operational status of the HOP.
OC3 Area
Admin Status Administrative status of the OC-3 line.
Oper Status Operational status of the OC-3 line.
Port Type Type of port.
Last Changed Date and time of the last status change of the line.
Scrambling Any scrambling that has been applied to the SONE T payloa d.
Maximum Speed Maximum bandwidth for the line.
Loopback Loopback setting configured on the line.
Port Description Description of the port defined by the user.
Clocking Clocking configured on the line.
Specific Type Specific type of line; in this case, OC3.
Internal Port Whether or not the line includes an internal port: True or False.
Ss Ctps Table Size Size of the SONET/SDH Connection Termination Point (CTP) table.