8-12
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 8 Tracking Faults Using Prime Ne t work Events
Working with Cisco Prime Network Events
Step 3 You can view additional properties in the following tabs:
• Advanced tab—See Table 8-14.
• Affected Parties tab—See Table 9-7.
• Audit tab—See Table 8-15.
• Provisioning tab—See Table 8-16.
• Security tab—See Table 8-17.
• Trap tab—See Table 8-18.
The tabs that are displayed depend on the type of event, such as a Service event or a Provisioning event.
Device Time The time zone of the device.
Note This information is available only for Cisco ASR5000 devices.
Category The category of the fault, which can be any one of the following:
• Communications—Associated with procedures and/or processes required to
convey information from one point to another.
• Quality of Service—Associated with a degradation in the quality of service.
• Processing error—Associated with a software or processing fault equip ment.
• Environmental—Associated with a condition relating to an enclosure in
which the equipment resides.
• Equipment—Associated with an equipment faul t.
• Undetermined—Not categorized.
Nature The nature of the fault, which can be one of the fol lowing:
• ADAC (Automatically Detected Automatically Cleared)—When the cleari ng
is automatically detected and cleared by Element Management System
(EMS). For example, Link Down.
• ADMC (Automatically Detected Manually Cleared)—When clearing
requires manual intervention. For example, DWDM Fatal Error syslog.
Alarm ID This field is displayed only for network events.
Alarm identifier, hyperlinked to the Ticket Properties window or the Alarm
Properties window.
Causing Event This field is displayed only for network events.
The identifier of the causing event.
Details Detailed description of the event.
Troubleshooting The probable cause of the event, action to be taken to rectify the problem, and the
clearing condition.
Note This information is available only for service events and Cisco ASR5000
traps.
Table 8-13 Details Tab for Events (continued)
Field Description