4-11
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 4 Device Configurations and Software Images Use the CCM Dashboard
Figure 4-2 CCM Dashboard
Dashlet Provides information about:
Top Families Four device families with the highest number of devices in the network. Smaller
groups can be viewed by toggling to the tabular form. From here, you can distribute
and activate software images to a selected family.
Note You may face resizing issues when you hover the cursor over this dashlet, if
you have enabled the Right to Left (Hebrew) settings in your browser.
Configuration
Sync Status (Cisco IOS) Devices for which the startup and running device configurations are in
sync or not in sync. Whenever a Cisco IOS configuration file is retrieved from a
device and copied to the archive, Prime Network compares the latest version of the
startup configuration with the latest version of the running configuration file. I f there
is a mismatch, Prime Network adds the device to the list of out-of-sync devices. The
information is refreshed whenever you click the Dashboard.
A “100% Unavailable” message is displayed when there are no Cisco IOS device
images or if the initial configuration sync up setting is not enabled (controlled by the
“Enable/Disable Initial config sync up on restart” setting on the Configuration
Management Settings page).
Configuration
Changes in the
Last Week
Number of device configuration changes detected for each day of the previous week.
This dashlet is empty when configuration change notification is not enabled
(controlled by the “Enable/Disable Event-Triggered Config Archive” setting on the
Configuration Management Settings page).
Most Recent
Configuration
Changes
Last five device configuration changes that were made to devices in the network. This
dashlet is empty if configuration change notification is not enabled. It is controlled
by the “Enable/Disable Event Triggered Config Archive” setting on the
Configuration Management Settings page (see Change Configuration Managemennt
Global Settings, page 4-61).
The Commit ID and Diff columns apply only to Cisco IOS XR devices. Other device
types will display N/A in those columns.