28-11
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 28 Monitoring ADSL2+ and VDSL2 Technology Enhancements User Roles Required to Work with ADSL2+/VDSL2 Technologies
Viewing the TLS Access Profile
To view the TLS access profile details:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 Expand the Logical Inventory node and choose TLS Access Profiles. The relevant details are displayed
in the content pane as shown in Figure 28-5.
Figure 28-5 TLS Access Profiles
Table 28-6 describes the N-to-One Access Profile details.
Table 28-6 N-to-One Access Profiles
Field Description
Table Types The type of access profile, which in this instance is TLS Access Profile.
TLS Access Profiles
Profile Name The name of the TLS access profile.
Input Service Policy The name of the service policy that is assigned to the access profile as an
input policy. This is a rate-limiting policy that controls and limits all u nicast
incoming traffic from the B6 card to the subscriber.
Output Service Policy The name of the service policy that is assigned to the access profile as an
output policy. This is a rate-limiting policy that controls and l imits all unicast
outgoing traffic to the B6 card from the subscriber.
S-Vid The unique Subscriber VLAN identification code. This code can be any
value between 2 and 122.
Mac Limit The maximum number of MAC addresses allowed for the specific service.
Maximum Priority The maximum 802.1 priority level.
Priority The 802.1 priority level configured and applied to the incoming S-VID
packet. This level can be any value between 0 and 6.