18-40
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
MPLS TE Properties Whether or not traffic engineering (TE) properties are configured on
the interface:
• Checked—MPLS TE properties are configured on the interface.
• Unchecked—MPLS TE properties are not configured on the
interface.
Discovery Protocols Discovery protocols used on the interface.
Label Switching Table
Incoming Label Incoming MPLS label identifier.
Action Type of switching action: Null, Pop, Swap, Aggregate, Untagged, or
Act. If an action is defined as Pop, an outgoing label is not required.
If an action is defined as Untagged, an outgoing label is not present.
Outgoing Label Outgoing label.
Out Interface Name of the outgoing interface, displayed as a hyperlink to the port
subinterface in physical inventory.
IP Destination Destination IP address.
Destination Mask Subnet mask of the destination.
Next Hop IP address of the next hop in the path. The IP address is used for
resolving the MAC address of the next MPLS interface that you
want to reach.
VRF Table
Incoming Label Incoming VRF label identifier.
Action Type of switching action: Null, Pop, Swap, Aggregate, Untagged, or
Act.
VRF VRF name, hyperlinked to its location in logical inventory.
IP Destination Destination IP address.
Destination Mask Subnet mask of the destination.
Next Hop IP address of the next hop in the path. The IP address is used for
resolving the MAC address of the next MPLS interface that you
want to reach.
Out Interface Name of the outgoing interface, displayed as a hyperlink to the port
subinterface in physical inventory.
Traffic Engineering LSPs
LSP Name Label switched path (LSP) name.
LSP Type Segment type: Head, Midpoint, or Tail.
Source Address Source IP address.
Destination Address Destination IP address.
In Label Incoming label, if not a head segment.
In Interface Incoming interface, if not a head segment.
Out Interface Outgoing interface, if not a tail segment.
Table 18-17 Label Switching Properties in Logical Inventory (continued)
Field Description