Cisco Systems 4 Using an Ethernet Port, Using a Pseudowire

11-12
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 11 Using Cisco PathTracer to Diagnose Problems
Launching Path Tracer
Using an Ethernet Port
To launch a path trace from an Ethernet port:
Step 1 In physical inventory, right-click the required port (Physical
Inventory > Chassis > slot > subslot > port) and choose one of the following options as shown in
Figure 11-6:
• PathTracer > From Here to Destination
• PathTracer > Start Here
Figure 11-6 Ethernet Port Path Trace Launch Point
Step 2 Depending on your choice in Step 1, specify the required destination information or select the path trace
endpoint.
The Cisco PathTracer window appears, displaying the resulting path trace.
Using a Pseudowire
To launch a path trace from a network pseudowire endpoint:
Step 1 In the navigation pane or map pane, expand the required network pse ud owire.
Step 2 Right-click the required pseudowire endpoint and choose PathTracer > From Here to Destination.
The Path Information dialog box is displayed as shown in Figure 11-7.