25-48
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the creden tial s, clic k E dit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Viewing QoS Class Index to QoS (QCI-QoS) Mapping
The QoS Class Index (QCI) to QoS mapping configuration mode is used to map Dices to enforceable
QoS parameters. Mapping can occur between the RAN and the S-GW, the MME, and/or the P-GW in an
LTE network or between the RAN and the harped Serving Gate way (HSGW) in an eHRPD net work. This
is a global configuration. These maps can be imported by P-gateway and S-gateway to enforce these
parameters on upstream/downstream traffic.
Prime Network Vision displays the QCI-QoS mapping information under the Mobile node in the logical
inventory. See Figure 25-18.
Note QCI-QoS mapping is applicable only for the ‘local’ context in the logical inventory.
To view QCI-QoS mapping:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > local > Mobile > QCI-QoS Mapping.
Prime Network Vision displays the list of QCI-QoS mapping records configured under the container.
You can view the individual record from the table on the right pane or by choosing Logical
Inventory >Context > Mobile > QCI-QoS Mapping > Mapping Name.
Table 25-29 describes the QCI-QoS mapping details.
Table 25-28 S-GW Commands
Command Navigation Description
Create S-GW PLMN Right-click on a
S-GW service >
Commands >
Configuration
Use this command to create a PLMN for
S-GW.
Delete S-GW Use this command to delete a S-GW.
Modify S-GW Use this command to modify the
configuration details for a S-GW.
Table 25-29 QCI-QoS Mapping
Field Description
Mapping Name Name of the QCI-QoS mapping record.
QCI-QoS Mapping Table
QCI Number QCI number.
QCI Type QCI type.