18-2
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
User Roles Required to Work with MPLS N e t works
For more information on user authorization, see the Cisco Prime Network 4.0 Administrator Guide.
The following tables identify the tasks that you can perform:
• Table 18-1 identifies the tasks that you can perform if a selected element is not in one of your
assigned scopes.
• Table 18-2 identifies the tasks that you can perform if a selected element is in one of your assigned
scopes.
By default, users with the Administrator role have access to all managed elements. To change the
Administrator user scope, see the topic on device scopes in the Cisco Prime Network 4.0 Administrator
Guide.
Table 18-1 Default Permission/Security Level Required for Working with MPLS Networks -
Element Not in User’s Scope
Task Viewer Operator OperatorPlus Configurator Administrator
Working with Elements
Add tunnels to VPNs — X X X X
Add VPNs to a map — — X X X
Create VPNs — — X X X
Move virtual routers between VPNs — X X X X
Remove tunnels from VPNs X X X X X
Remove VPNs from a map — — X X X
Viewing Element Properties
View 6RD properties — — — — X
View BF D prop e r ties — — — — X
View cross-VRF routing entries — — — — X
View LSE properties — — — — X
View MP-BGP information — — — — X
View MPLS TE tunnel information — — — — X
View MPLS-TP information — — — — X
View port configurations — — — — X
View pseudowire end-to-end
emulation tunnels —— — — X
View rate limit information — — — — X
View the ARP table — — — — X
View the NDP table — — — — X
View VPN properties X X X X X
View VPNs X X X X X
View VRF egress and ingress
adjacents —— — — X
View VR F prop e r ties — — — — X
Working with Overlays
Add VPN overlays X X X X X