21-5
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 21 Viewing and Managing SBCs Viewing SBC SBE Properties

Viewing VDBE H.248 Properties

To view VDBE H.248 properties, choose Logical Inventory > Session Border
Controller > DBE > VDBE.
Table 21-6 describes the VDBE H.248 properties that are displayed in logical inventory.
Viewing SBC SBE Properties
The SBE controls the access of VoIP signaling messages to the network core and manipulates the
contents of these messages. It does this by acting as a SIP B2BUA or H.323 gateway.
To view SBC SBE properties, choose Logical Inventory > Session Border Controller > SBE.
Table 21-7 describes the information displayed in logical inventory for an SBE.
Table 21-6 VDBE H.248 Properties
Branch Description
H248 Controller H.248 controller used by the DBE.
The Media Gateway Configuration (MGC) table displays the following
information:
• Index—The number of the H.248 controller. The profile is used to
interoperate with the SBE.
• Remote IP—The remote IP address for the H.248 cont roll er.
• Remote Port—The remote port for the H.248 controller.
• Transport—The transport for communications with the remote device.
H248 Interface The SBC H248 Control Interface table displays the following information:
• IP Address:
–
In DM mode, the local IP address of the DBE used to connect to the
SBE.
–
In UM mode, the local IP address used to connect to the media gateway.
• Port—The port for the H.248 controller interface.
• Transport—The transport the H.248 controller interface uses.
• Association—The relationship between the SBE and the media gateway.
Table 21-7 SBC SBE Properties
Field Description
Process Name of the process, such as SBE.
Process Status Status of the process, such as Running or Idle.
Name Name assigned to this SBE.