Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Aspire Software Manual Programming ◆1011
Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Description
Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing
Call Service.
Input Data
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Item
No. Item Input Data Default Related Program
01 Seizure Trunk Line Mode 0 = Priority route
1 = Circular route 0 14-05
14-06
02 Intercom Interdigit Time
When placing Intercom calls, extension users
must dial each digit within this interval.
0-64800 Seconds 10
03 Trunk Interdigit Time (External)
The system waits for this timer to expire
before placing the call in a talk state (Call
Timer starts after timer expires, Voice Over
and Barge-In are not allowed until after timer
expires). If set to “0”, Voice Over and Barge
In will not work for external calls.
This timer affects CO and PRI outdialing.
0 = Disabled
1-64800 Seconds 5 14-02-08
04 Dial Tone Detection Time
If dial tone detection is enabled, the system
will wait this interval for the Telco to return
dial tone. When the interval expires, the sys-
tem assumes dial tone is not present. To dis-
able this timer (and have the system wait
continuously), enter 0.
0-64800 Seconds 5 14-02-05
35-05-01
05 Disconnect Time
The system waits for this timer to expire
before disconnecting a call when dial tone is
not detected.
0-64800 Seconds 3
06 Dial pause at first digit 0-64800 Seconds 1
07 Toll Restriction Override Time
After dialing the Toll Restriction Override
codes, the system removes Toll Restriction
from the extension for this interval.
0-64800 Seconds 10 20-08-06
21-07
08 Preset dial display hold time 0-64800 Seconds 10