Program 10 : System Configuration Setup
10-09 : DTMF and Dial Tone Circuit Setup
Aspire Software Manual Programming ◆745
10-09 : DTMF and Dial Tone Circuit Setup
Description
Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the NTCPU
PCBs for either DTMF receiving or dial tone detection. The NTCPU PCB has 16 circuits initially.
On the Aspire, with additional DSPDBs installed, the system can provide a total of 64 circuits (32 +
32). These are used as follows:
●Extension DTMF receiver for SLT
●Trunk DTMF receiver for analog trunks, dial tone & busy tone detection
for analog trunks
Input Data
Conditions
None
Feature Cross Reference
●Caller ID
●Central Office Calls, Placing
●Direct Inward Dialing (DID)
●Direct Inward System Access (DISA)
●Tie Lines
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Circuit/Resource Number 01-64
Item No. Input Data Default Setting
01 0 = Common use
1 = Extension only
2 = Trunk only
Circuit/Resource 01-08: 1 (Extension only)
Circuit/Resource 09-32: 2 (Trunk only)
Circuit/Resource 33-64: 0 (Common use)