Direct Inward Dialing (DID)
Aspire Software Manual Features ◆283
Conditions
(A.) Analog DID requires the installation of a 4DIOPU-A1 PCB (provides four DID ports) or
8DIOPU-A1 PCB (provides eight DID ports). Depending on programming, the system may
assign both trunk and extension ports (if OPX is selected in Program 10-03-01) when this
PCB is installed.
(B.) DID service must be purchased from your local telephone company.
(C.) DID Intercept for each DID number works for DID trunks with a trunk service type 3 in Pro-
gram 22-02. Other types of trunks may use the DID table, but the DID intercept feature for
each DID number is not yet supported.
(D.) T1 or PRI DID requires a T1/PRI PCB (1PRIU-T1).
Default Setting
Disabled.