Program 24 : Hold/Transfer Setup
24-02 : System Options for Transfer
Aspire Software Manual Programming ◆1101
24-02 : System Options for Transfer
Description
Use Program 24-02 : System Options for Transfer to define the system options for Transfer feature.
Input Data
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
• Option 7 enhanced with software 4.0E+.
• Option 10 available with software 4.0E+.
• Options 11 and 12 available with software
4.93+.
• Option 7 enhanced with software 4.0E+.
• Option 10 available with software 4.0E+.
• Options 11 and 12 available with software
4.93+.
Item
No. Item Input Data Default Related
Program
01 Busy Transfer
Use this option to prevent or allow extensions to Transfer
calls to busy extensions.
0 = Disable
1 = Enable 0
02 MOH or Ringback on Transferred Calls
Use this option to enable or disable MOH on Transfer. If
enabled (0), a transferred caller hears MOH while their
call rings the destination extension. If disabled (1), a
transferred caller hears ringback while their call rings the
destination extension.
0 = Hold Tone
1 = Ring Back Tone 0 20-03-02
03 Delayed Call Forwarding Time
If activated at an extension, Delayed Call Forwarding
occurs after this interval. This also sets how long a Trans-
ferred call waits at an extension forwarded to Voice Mail
before routing to the called extension’s mailbox.
0-64800 (Seconds) 10
04 Transfer Recall Time
An unanswered transferred call recalls to the extension
that initially transferred it after this interval.
0-64800 (Seconds) 30
05 Transfer to Busy Department Group Reccall Timer
After a trunk is unscreen transferred to a busy Depart-
ment Group, this timer will start. If the call is not
answered, it will recall the originator.
0-64800 (Seconds) 25