Maintenance
394 ◆Features Aspire Software Manual
Secure Set Relocation Conditions
●Any user-defined programming stored in the SRAM will not be swapped (for example, Call
Forward set up, Selectable Display Messaging, etc.).
●The extensions to be swapped must be idle while the swap is performed, or an "Invalid" error
message will be received.
●Data for virtual extension's cannot be swapped.
●When a swap is performed, the following actions are executed for the swapped extensions.
- Camp On Clear (Program 11-12-05)
- Common Cancel (Program 11-12-37)
- Last Number Redial Clear (Program 11-12-17)
- Saved Number Clear (Program 11-12-18)
- Incoming History data is deleted.
●Using this option will also swap the order in which these extensions are displayed in all exten-
sion-related programs . This means that the system will no longer display all the extension
numbers from low to high. For example, if port 2 and 6 were swapped, when viewing the
extensions in 15-02-01, the extensions will display in the following order: 301, 306, 303, 304,
305, 302.
21-20 SIP Trunk Call Discernment Setup for Extensions
22-04 Incoming Extension Ring Group Assignment
22-06 Normal Incoming Ring Mode
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
24-06 Fixed Call Forwarding
24-07 Fixed Call Forwarding Off-Premise
26-04 ARS Class of Service
26-07 Not used in U.S.
31-02 Internal Paging Group Assignment
41-02 ACD Group and Agent Assignments
41-17 ACD Login Mode Setup
42-02 Hotel/Motel Telephone Setup
92-05 Password for Extension Data Swap