Voice Mail
612 ◆Features Aspire Software Manual
Conditions
(A.) The periodic reminder message requires a DSP daughter board for Voice Response System
(VRS).
(B.) Ring Group calls do not follow extension call forwarding to voice mail.
(C.) NVM-2e does not accept Caller ID information.
(D.) Analog ports on the Aspire S CPU do not support Message Waiting lamping.
Default Setting
Disabled.
Programming
➻10-09-01 : DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception (type 0 or 1).
Use the following as a guide when allocating DTMF receivers:
- In light traffic sites, allocate one DTMF receiver for every 10 devices that use them.
- In heavy traffic sites, allocate one DTMF receiver for every five devices that use them.
➻11-07-01 : Department Group Pilot Numbers
Assign a Department Group pilot number for the Voice Mail (8 digits max). The extensions
are assigned to the group in Program 16-02-01.
➻15-02-26 : Multi-Line Telephone Basic Data Setup, MSG Key Operation Mode
Determine whether an extension’s MSG key should function as a Message key (0) or Voice
Mail key (1) (Default=0). If set as a Message key, the user will be able to press the key to call
the voice mail only when they have new messages. If set as a Voice Mail key, it will function
as a normal Voice Mail key (it will not be active if Centralized Voice Mail is used).
➻15-03-01 : Single Line Telephone Basic Data Setup - SLT Signaling Type
For each Aspire Mail extension, this option must be set to “0”.
➻15-03-03 : Single Line Telephone Basic Data Setup - Terminal Type
Set all SLIU ports used for Voice Mail as type 1.
➻15-03-05 : Single Line Telephone Basic Data Setup - External Reverse
This item is not used in the U.S. and should be left at (0) for the voice mail ports.
➻15-03-06 : Single Line Telephone Basic Data Setup - Extension Reverse
This item is not used in the U.S. and should be left at (0) for the voice mail ports.
➻15-03-09 : Single Line Telephone Basic Data Setup - Caller ID Function for External
Module
This option must be set to ‘0’ when voice mail is used or the integration code for the discon-
nect function will be incorrect.
➻15-07-01 : Programmable Function Keys
Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77) fol-
lowed by:
- Your own extension number if you are setting up your own Voice Mail key.
- A virtual extension number if you are setting up a Message Center key for a virtual extension.
- A co-worker’s extension number if you are setting up a Message Center key for an installed
extension.
- An uninstalled extension’s number if you are setting up a Message Center key for an unin-
stalled extension.
(Optional) Assign a Voice Mail Record key to an extension (code 78).
(Optional) Assign a Personal Answering Machine Emulation key (code 16).
(Optional) Use a Call Redirect key (49) to allow a user to transfer a call to another extension
or voice mail without answering the call.