Program 35 : SMDR and Account Code Setup
35-02 : SMDR Output Options
Aspire Software Manual Programming ◆1223
Conditions
None
Feature Cross Reference
●Station Message Detail Recording
Telephone Programming Instructions
To enter data for Program 35-02 (SMDR Output Options):
1. Enter the programming mode.
2. 35 02
3. Enter the number of the item you want to program.
4. Select the SMDR port number to be programmed by pressing the FLASH or the VOLUME
▲ or VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
18 Caller ID Name Output Method
Select whether to display up to 16 characters
of the Caller ID Name on the same line as the
call record or if a line feed should be added
and up to 24 characters of the Caller ID Name
will be displayed on the following line. If the
line feed option is selected, the Caller ID
Name will be displayed on the next line as :
NEXT "Caller ID Name".
This setting will work regardless of the setting
in Program 35-02-15.
Note: With this option set to "1", if your com-
munications program (such as HyperTerminal)
has the line wrap option enabled in the ASCII
setup, an additional line break may appear
above the Caller ID name line.
0=Same Line
1=Line Feed Prior to
Caller ID
0
35-02-01 SMDR Port1
T/R Call 1:Display
back ↑↑
↑↑ ↓↓
↓↓ select
35-02-nn SMDR Portn
nnnnn
←←
←← →→
→→
Item
No. Item Input Data Default