Program 20 : System Option Setup
20-02 : System Options for Multi-Line Telephones
958 Programming Aspire Software Manual
06 Preselection Time
When a keyset user preselects a line key,
the system remembers the preselection
for this interval.
0-64800 seconds 5
07 Time and Date Display Mode
Set how the Time and Date appear on
display telephones. There are eight dis-
play modes.
1-8
Type 1: (12 hour) 10 MAR TUE 3:15PM
Type 2: (12 hour) 3:15PM MAR 10 TUE
Type 3: (12 hour) 3-10 TUE 3:15 PM
Type 4: (12 hour) 3:15PM TUE 10 MAR
Type 5: (24 hour) 10 MAR TUE 15:15
Type 6: (24 hour) 15:15 MAR 10 TUE
Type 7: (24 hour) 3-10 TUE 15:15
Type 8: (24 hour) 15:15 TUE 10 MAR
3
08 LCD Display Holding Time
This timer determines how long a user’s
display will show Caller ID for a second
incoming call.
0-64800 seconds 5
09 Disconnect Supervision
Use this option to enable or disable dis-
connect supervision for the system
trunks.
0 = Disable
1 = Enable 1
10 Time Before Shifting to Power-Saving
Mode 0 = Power-Saving Mode Off
1 = 1 minutes
2 = 2 minutes
3 = 4 minutes
4 = 8 minutes
5 = 16 minutes
6 = 32 minutes
7 = 64 minutes
0
11 Handsfree Microphone Control
Use this option to set the default setting
for a keyset’s Handsfree microphone on
system start up. If set to 0, a user can
place a call Handsfree without lifting the
handset. If set to 1, a user can initially
place a call Handsfree but must lift the
handset to talk or press their MIC key.
Changes to this option will take affect
when the system is reset.
0 = Off
1 = On 1
12 Forced Intercom Ringing
Use this option to enable or disable
Forced Intercom Ringing. If enabled,
incoming Intercom calls normally ring.
If disabled, Intercom calls
voice-announce.
0 = Disable (Voice)
1 = Enable (Ring) 0
13 - Not Used -
Item
No. Item Input Data Default