Dial Tone Detection
Aspire Software Manual Features ◆277
Dial Tone Detection
Description
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key
or dialing #9 and the trunk’s number), the system will drop the trunk if dial tone does not occur. If
the user access the trunk via a Trunk Group (by dialing a trunk group code or automatically through
a feature like Last Number Redial), the system can drop the trunk or optionally skip to the next
trunk in the group. Refer to the chart under Programming below for more.
Dial Tone Detection is available for the following features:
●Automatic Route Selection
●Abbreviated Dialing
●Central Office Calls, Placing
●Last Number Redial
●Loop Keys (outbound)
●Save Number Dialed
●T1 Trunking (with ANI/DNIS Compatibility)
●Tie Lines
●Trunk Group Routing
●Trunk Groups
Conditions
None
Default Setting
Disabled for manually dialed calls; enabled for automatically dialed calls.
Aspire S Aspire M/L/XL
• Available
• Tone Detection Setup is available.
• The Next Trunk in Rotary if No Dial Tone option is
available.
• Available.
• Tone Detection Setup is available.
• The Next Trunk in Rotary if No Dial Tone option is
available.