NEC 5 , , ,

Caller ID

Aspire Software Manual Features ◆187

Operation

DISPLAYING THE INCOMING NUMBER

To display the name/number of an incoming call only lamping your telephone:

Without Automatic Handsfree on Incoming Line/Loop Key Calls (Program 15-02-08=0)

1. Do not lift the handset.

2. Press line/loop key.

If the Caller ID data includes the name, you can scroll left and right by pressing * and #.

3. Lift handset or press SPK to answer the call.

1. Do not lift the handset.

2. Press FLASH plus the ﬂashing line key.

DISPLAYING CALLER ID FOR A CALL IN PARK

To display Caller ID for a call in Park:

With Program 15-02-08 set to “0” (pre-select) for this feature.

1. With Program 15-02-08 set to “0” (pre-select) : With a call in Park, press the PARK key.

(PGM 15-07 or SC 852: *04).

With Program 15-02-08 set to “1” (one touch): With a call in Park, press FLASH then the

PARK key (PGM 15-07 or SC 852: *04).

STORING A NUMBER

To store a Caller ID number in an Abbreviated Dial bin:

1. With a keyset in an idle condition the display shows:

2. Press the LIST Soft Key. The display shows:

3. Press the CID Soft Key (Caller ID). The display shows:

## = List Number

xx = Caller ID number

mm-dd hh:mm = incoming date and time

↑↑

↑↑ = Preview List

↓↓

↓↓ = Next List

Store = Store in List

DEL = Delete from List

1-01 FRI 09:00AM

301 STA 301

LIST DIR ICM PROG

LIST●MENU

Redial CID

##: xxxxxxxxxxxxx

mm-dd hh:mm

↑↑

↑↑ ↓↓

↓↓ Store DEL