NEC 5 - page 509

Ring Groups

Aspire Software Manual Features ◆491

➻22-05-01 : Incoming Trunk Ring Group Assignment

Assign trunks to ring groups.

➪Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➪Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➻22-08-01 : DIL/IRG No Answer Destination

For DIL Delayed Ringing, assign the DIL No Answer Ring Group. An unanswered DIL rings

this group after the DIL No Answer Time (Program 22-01-04) expires. DIL Delayed Ringing

can also reroute outside calls ringing a Ring Group, In-Skin/External Voice Mail, or Central-

ized Voice Mail.

➪Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➪Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➻22-12-01 : DID Intercept Ring Group

For each DID Translation Table, assign the destination for DID Intercept. The destination can

be a Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. For each table,

make a separate entry for each Night Service mode.

➪Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➪Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➻25-03-01 : VRS/DISA Transfer Ring Group With Incorrect Dialing

Set the transfer destination for each DISA and Automated Attendant (OPA) trunk. The destination

can be a Ring Group or Voice Mail. Make a separate entry for each Night Service mode.

➪Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

➪Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail

Note: For incoming calls, Ring Group programming (22-04/22-05) overrides Access Map

programming (14-07/15-06).

Use the charts below to program the following example:

1 Trunks ring the same in the day as at night.

For this extension . . .1

301 Trunk 1 rings Trunk 2 ﬂashes Trunk 3 ﬂashes

302 Trunk 1 ﬂashes Trunk 2 rings Trunk 3 ﬂashes

303 Trunk 1 ﬂashes Trunk 2 ﬂashes Trunk 3 rings

Program 22-04 : Incoming Extension Ring Group Assignment

Ring Group1>123

Trunk 1 X - -

Trunk 2 - X -

Trunk 3 - - X

X = Trunk assigned to indicated Ring Group

1 Make the same 22-05 entry for all Night Service modes.

Program 22-05 : Incoming Trunk Ring Group Assignment

Ring Group >123

Ext. 301 1 0101

Ext. 302 01101

Ext. 303 01011

1 = Extension rings

0 = Extension doesn’t ring

1 To allow extension user to answer ﬂashing line, be sure to give

extension incoming access to the trunk in Programs 14-07 and 15-06.