Ringdown Extension, Internal/External
494 Features Aspire Software Manual
Ringdown Extension, Internal/External
Description
With a Ringdown Extension, a user can call another extension, outside number, or Abbreviated Dialing
number by just lifting the handset. The call automatically goes through - there is no need for the user to
dial digits or press additional keys. Ringdown Extensions are frequently used for lobby phones, where
the caller just lifts the handset to get the information desk or off-site Reservation Desk.
After the Ringdown Extension user lifts the handset, ringdown occurs after a programmable interval.
Depending on the setting of this interval, the extension user may be able to place other calls before the
ringdown goes through.
The system allows each extension in the system to have a Ringdown Extension. All extensions can share
the same dialing number, if desired.
Conditions
(A.) Ringdown extension has no effect on an extension’s current (active) call.
(B.) The Ringdown Extension user must lift the handset for ringdown to work.
Default Setting
Disabled.
Programming
20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
20-08-09 : Class of Service Options (Outgoing Call Service) - Hotline/Extension Ringdown
In an extension’s Class of Service, enable (1) or disable (0) ringdown. If disabled in Class of
Service, the settings in Program 21-11 below have no effect.
21-01-09 : System Options for Outgoing Calls - Ringdown Extension Timer
After the user lifts the handset, the extension automatically calls the ringdown destination
after this interval (0-64800 seconds). A setting of ‘0’ will immediately ring the programmed
extension. Any other setting will delay the ringdown the number of seconds programmed.
21-11-01 : Extension Ringdown (Hotline) Assignments
Program the ringdown (Hotline) source and destination (target) number, up to 24 digits (512
Hotline assignments). Remember to include the trunk access code (usually 9) in front of he
number when dialing outside numbers. When programming Common Abbreviated Dialing
numbers as the destination, the entry should be “853+bin number”.
Aspire S Aspire M/L/XL
Available - 512 Hotline assignments and
50 extensions/virtual extensions with software 2.08-
2.21; 66 extensions/virtual extensions with software
2.50 and higher.
Available - 512 extensions/virtual extensions and 512
Hotline assignments.