Program 15 : Extension, Basic Setup
15-02 : Multi-Line Telephone Basic Data Setup
902 ◆Programming Aspire Software Manual
02 Trunk Ring Tone
Use this option to set the tone (pitch)
of the incoming trunk ring for the
extension port you are programming.
1 = High
2 = Mid range
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
2 22-03
82.01
03 Extension Ring Tone (Pitch)
Use this option to set the tone (pitch)
of the incoming extension call ring for
the extension port you are program-
ming. Also see program 15-08.
1 = High
2 = Mid range
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
8 15-08
15-10
82-01
04 Abbreviated Dialing DIAL Key
Control
Use this option to control the function
of the extension’s DIAL key when
used with Abbreviated Dialing. The
DIAL key can access either the Com-
mon or Group Abbreviated Dialing
numbers.
0 = Common and individual
Abbreviated Dialing
1 = Group Abbreviated Dialing
0
05 Transfer Key Operation Mode
Use this option to set the operating
mode of the extension’s CONF key.
The keys can be for Call Transfer,
Serial Calling or Flash. When select-
ing the Flash option (selection 2), refer
also to Program 81-01-14.
0 = Transfer
1 = Series call
2 = Flash
0
06 Hold Key Operating Mode
Use this option to set the function of
the keyset Hold key. The Hold key can
activate normal Hold, Exclusive Hold
or Park.
0 = Normal Hold
1 = Exclusive Hold
2 = Park
0
07 Automatic Hold for CO Lines
Determine whether an extension will
use Automatic Hold for CO calls or if
the call should disconnect.
0 = Enable (Hold)
1 = Disable (Disconnect) 1
08 Automatic Handsfree
Use this option to set whether pressing
a key access a One-Touch Key or if it
pre-selects the key.
0 = Pre-select
1 = One-touch (Automatic
Handsfree)
1 20-09-02
Item
No. Item Input Data Default Related
Program