Program 90 : Maintenance Program
90-13 : System Information Output
1524 ◆Programming Aspire Software Manual
90-13 : System Information Output
Description
Use Program 90-13 : System Information Output to define the output port to be used as the sys-
tem information output. The baud rate for the COM port should be set in Program 10-21-02.
Input Data
Conditions
None
Feature Cross Reference
None
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Item No. Item Input Data Default
01 Output Port Type
Indicate the type of connection used
to print the system information.
0 = No setting
1 = COM port (NTCPU)
2 = USB port (NTCPU)
3 = -- Reserve –
4 = CTA/CTU
0
02 Destination Extension Number
If the output port type (item 1) is set
to CTA/CTU, enter the extension
number with the CTA/CTU connec-
tion.
Extension Number
(Up to 8 digits) No setting
03 Output Command
Dialing 1 from this program sends
the system report to the connected
device.
Dial 1 and press HOLD
(Press only HOLD key for cancel) -