NEC 5 - page 681

VoIP
Aspire Software Manual Features ◆663
5. Optionally, if the IP and subnet mask addresses were set up in the phone’s programming using the
previous programming procedure, you can use the Network Configuration window to define the
network settings for the phone. If these settings were made previously, skip to Step 6. If any
changes are made to this window, you must click SUBMIT in order for the changes to be sent
to the phone (this will cause the phone to reset).
Update Firmware Enter the TFTP Server Address, User ID (Optional), Password (Optional) and
the File Name and then click “Update” to start the firmware update.
Update Configuration Enter the TFTP Server Address, User ID (Optional), Password (Optional) and
the File Name and then click “Update” to start the firmware update.
User Configuration The User Configuration allows changes to the options available when signing in
at the User Level.
Phone Settings: The Phone Settings page allows users to
read and modify general call-related set-
tings such as Call Duration Timer, Call
Waiting, and Ringer Tone Selection.
Function Keys: The Function Keys page allows users to
read and modify the function key con-
figurations (Speed Dial, Call Forward,
Voice Mail, Do Not Disturb).
Phone Book: The Phone Book can be viewed and
edited using the web browser. However,
if the Phone Book is opened by the user
on the phone itself, it cannot be edited
through the browser.
Password Change: The Password Change page allows modi-
fication of the User password. If the
browser’s Refresh button is clicked before
Submit, the old password will be kept.