Selectable Ring Tones
Aspire Software Manual Features ◆513
Related Features
Distinctive Ringing, Tones and Flash Patterns
This feature can be used to change the default ring tones.
i-Series Telephones
Selectable Ring Tones is not available for i-Series phones on the Aspire system.
Single Line Telephones
Single line telephones cannot use Selectable Ring Tones.
Transfer
Transferred calls on DISA, DID, ISDN trunks, or from the VRS can display the reason a call
is being transferred (Call Forward, Busy, No Answer, or DND) unless a Selectable Display
Message is enabled. If enabled, the message shall be displayed instead of the reason for the
call transfer.
Operation
To change your extension’s incoming ring tones:
1. Press idle CALL key.
2. Dial 820.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1-8).
5. Press SPK to hang up.
To listen to the incoming ring choices:
1. Press idle CALL key.
2. Dial 811.
3. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring.
For trunk ring, enter the tone to which you want to listen.
4. For Intercom Ring:
Dial code for the ring pattern you want to hear (1-8).
OR
For Trunk Ring:
Dial code for the ring pattern you want to hear (1-8) and then dial the tone for the ring pattern
(1-4).
5. Press SPK to hang up.