Call Waiting / Camp On
176 Features Aspire Software Manual
20-13-35 : Class of Service Options (Supplementary Service) - Block Camp-On
Use this option to enable (1) or disable (0) an extension’s ability to block callers from dialing
2 to Camp On.
20-15-09 : Ring Cycle Setup
If required, change the ring cycle for Callback and Transferred calls.
20-18-06 : Service Tone Timer - Call Waiting Tone Timer
Use this option to set the interval between Call Waiting tones. This timer also sets the interval
between Off Hook Signaling alerts.
Related Features
Callback
If an extension user Camps-On and then hangs up, the system converts the Camp On to a Callback.
Dual Line Appearance/Off Hook Signaling
If an extension busy on a call has Off Hook Signaling, an incoming Intercom calls rings the
idle second line appearance.
Off Hook Signaling
The Off Hook Signaling Enhancements give an extension the ability to block a caller from
dialing 804 to Camp On and/or DID callers from automatically camping on.
Programmable Function Keys
Function keys simplify Call Waiting/Camp On operation.
Transfer
An extension user may be able to Transfer a call to a busy extension.
Trunk Queuing/Camp-On
Trunk Queuing lets an extension user Camp-On to a trunk.

Operation

To Camp-On to a busy extension:
1. Call busy extension.
2. Dial 2 or press Camp-On key (PGM 15-07 or SC 851: 35).
3. Do not hang up.
To Camp-On to a trunk, see Trunk Queuing.
To cancel a Camp-On request:
1. Hang up.
2. At keyset, press idle CALL key and dial 870.
OR
At keyset, press Camp-On key (PGM 15-07 or SC 851: 35).
OR
At single line set, lift handset and dial 870.
To Split (answer a waiting call) at a single line telephone:
Listen for Camp On beep.
1. Hookash and dial 894.
To repeatedly split between the two calls.