Class of Service
Aspire Software Manual Features ◆229
15 Block Outgoing Caller ID
Turn off or on the system’s ability to automatically block outgo-
ing Caller ID information when a user places a call. If this
option is on, the system automatically inserts the Caller ID
block code *67 (defined in Program 14-01-21) before the user’s
dialed digits.
0 = Off
1 = On 0 0 14-01-20
14-01-21
16 Display E911 Dialed Extension Name and Number
Turn off or on an extension’s ability to display the name and
number of the extension that dialed 911.
0 = Off
1 = On 00
17 ARS Override of Trunk Access Map
Turn off or on an extension’s ability to override the trunk access
map programming for outgoing calls.
0 = Off
1 = On 00
Class of Service Options (Outgoing Call Service), Program 20-09
Item
No. Item Input
data
Default
Related
Program
COS
01-14 COS 15
01 Second Call for DID/ DISA/ DIL/ E&M
Turn off or on the extension’s ability to receive a second call
from a DID, DISA, DIL, or tie line caller.
Note: With this option set to ‘1’, the destination extension must be
busy in order for a second DNIS caller to ring through. If the desti-
nation extension does not have a line or loop key available for the
second call and a previous call is ringing the extension but has not
yet been answered, the second caller will hear busy regardless of
this program’s setting.
0 = Off
1 = On 00
02 Caller ID Display
Turn off or on the Caller ID display at an extension. 0 = Off
1 = On 0 0 15-02-08
03 Sub Address Identification
Define whether an extension displays the Caller Sub-Address. 0 = Off
1 = On 00
04 Notification for Incoming Call List Existence
Determine whether an extension’s display will show “Check
List” when an incoming call has been missed by a user.
0 = Off
1 = On 0 0 20-09-02
05 Setting Handsfree Answerback or Forced Intercom Ringing
Turn off or on an extension’s ability to enable Handsfree
Answerback or Forced Intercom Ringing for their incoming
Intercom calls.
0 = Off
1 = On 1 1 11-11-15
11-11-16
Class of Service Options (Outgoing Call Service), Program 20-08
Item
No. Item Input
Data
Default
Related
Program
COS
01-14 COS 15