Program 14 : Trunk, Basic Setup
14-07 : Trunk Access Map Setup
Aspire Software Manual Programming 887
14-07 : Trunk Access Map Setup
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an
extension’s access options for trunks. For example, an extension can only place outgoing calls on
trunks to which it has outgoing access. There are 200 Access Maps with all 200 trunk ports pro-
grammed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign
Trunk Access Maps to extensions. Each trunk can have one of eight access options for each Access
Map.
Input Data
Default
Aspire S:
Access Map 1 = Trunk Ports 1-8 assigned with option ‘7’ access (incoming and outgoing
access and access when trunk is on Hold).
Aspire:
Access Map 1 = Trunk Ports 1-200 assigned with option ‘7’ access (incoming and outgoing
access and access when trunk is on Hold).
Aspire S:
Access Maps 2-8 - Trunk Ports 1-8 assigned with option ‘0’ access (no access).
Aspire:
Access Maps 2-200 - Trunk Ports 1-200 assigned with option ‘0’ access (no access).
Conditions
None
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Access Map Number Aspire S: 1-8
Aspire: 001-200
Item No. Trunk Port Number Input Data
01 Aspire S: 1-8
Aspire: 001-200 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk on Hold