Charts and Illustrations
Aspire Software Manual Features ◆19
Central Office Calls,
Answering /
Hold
#0 Using Universal Answer to pick up a call
ringing over the paging system -
172 + Line number (001-200) Answering a call on a specific trunk -
179 + 1 (set) or
0 (cancel) Changing the ability for a second call with
DID/DISA/DIL
Central Office Calls,
Placing #9 + 001-200 Placing a call over a specific trunk *01 + trunk
(100-200)
145 + trunk # + 1 (block)
145 + trunk # + 0 (enable) To block/busy out outbound usage on a
trunk with Trunk Port Disable. -
804 + trunk group (1-9 or
001-200) Placing an outside call over a trunk group *02 + group
Class of Service 177 Changing the COS of another extension.
Must be allowed in Program 20-13-28. -
Conference Hookflash + #1 + extension
+ hookflash twice Activating Conference from a Single Line
(500/2500) set 1016
Data Communications 883 Enabling the data connection auto-answer
mode -
884 Disconnecting an active data call -
Department Calling 150 + 0 (install) or
1 (remove) Logging in (0) or logging out (1) for your
Department Calling Group 46
Department Step
Calling # Step Calling through a Department Group 36
Dial Pad Confirmation
Tone 824 Enabling/disabling Dial Pad
Confirmation Tone -
Directed Call Pickup ** + ext. Picking up a call ringing or waiting at an
extension -
Do Not Disturb 847 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call
Forwards, and Transfers)
3 (All calls)
4 (Call Forwards)
Activating Do Not Disturb -
Door Box 802 + Door Box (1-4 or 1-8) Placing a call to a door Box -
822 A Door Box is forwarded off-premise -
E911 886 Turning off the E911 alarm -
Flash #3 Flashing a trunk from an SLT -
Table 4: Service Codes by Feature
For this feature... Dial this Service Code...1When you are... Also see
Function Key...
1 Except where indicated, dial Service code form Intercom dial tone (e.g., press idle CALL key first).