Barge In
150 ◆Features Aspire Software Manual
Operation
To Barge In after calling a busy extension:
The call must be set up for about 10 seconds before you can Barge In.
Listen for busy/ring or busy tone.
1. Call busy extension.
2. Press Barge In key (PGM 15-07 or SC 851: 34).
To Barge in without first calling the busy extension:
1. Press idle CALL key.
2. Dial 810.
OR
Press Barge In key (PGM 15-07 or SC 851: 34).
3. Dial busy extension.
To Barge In to a Conference call, dial the extension number of a user active on a Con-
ference call. When a new call is added to the conference, an intrusion tone is heard by all
parties, depending on system programming, and all display keysets show the joined party.
If Barge In is not possible:
- the extension user will hear a warning tone
- the DISA user will be rerouted to the defined ring group
OR
- the tie line user will hear a busy tone.
OR
Not available for DISA or tie line trunks:
1. Dial the extension number of the busy internal party.
2. Dial the single digit service code or the service code 810.
To Barge In to Conference Call:
1. Pick up the handset or press SPK and dial the service code (810=default).
If the telephone doesn’t have the proper COS, a warning tone is sent. After the user
hangs up, the system will automatically place a Callback to the extension.
2. Dial the extension number or press a DSS key of a telephone within a Conference call.
When a new call is added to the conference, an intrusion tone is heard by all parties in
the Conference, depending on system programming, and all display keysets show the
joined party. If a Conference is not possible:
- the extension user will hear a warning tone
- the DISA user will be rerouted to the defined ring group
OR
- the tie line user will hear a busy tone.
OR
Not available for DISA or tie line trunks:
1. Dial the extension number of the internal party.
2. Dial the single digit service code or the service code 810.