Night Service
Aspire Software Manual Features 447
Related Features
Central Ofce Calls, Answering and Placing/Ring Groups
There are separate Access Map and Ring Group programming entries for each Night Service
mode (Day 1, Night 1, Midnight 1, Rest 1, Day 2, Night 2, Midnight 2, Rest 2). Also, “Univer-
sal Answer” allows an extension user to pick up a UNA call.
Direct Station Selection (DSS) Console
Assign a Night Mode Key as required for DLS Consoles. The DSS Consoles provide Day and
Night keys.
Paging, External
With Universal Night Answer, outside calls can ring External Paging Zones.
Programmable Function Keys
Function keys simplify activating Night Service. Note: If the Night Mode Relay is connected
and there is any voltage present (pins 2 and 7 on the NTCPU’s CN17 connector), the night
mode cannot be toggled using the Night Mode Programmable Function Keys.
Operation
To activate Night Service by dialing codes:
1. At keyset, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 818. To change a different group’s mode, dial 118 + the group number (1-4 or 01-32).
3. Dial Night Service code:
1 Day 1 mode
2 Night 1 mode
3 Midnight 1 mode
4 Rest 1 mode
5 Day 2 mode
6 Night 2 mode
7 Midnight 2 mode
8 Rest 2 mode
4. Press SPK to hang up.
To activate Night Service by using programmable keys:
1. Press Night Service key (PGM 15-07 or SC 851: 09) + Mode code number (below).
1 Day 1 mode
2 Night 1 mode
3 Midnight 1 mode
4 Rest 1 mode
5 Day 2 mode
6 Night 2 mode
7 Midnight 2 mode
8 Rest 2 mode
To transfer a call to the Universal Answer External Page zones:
1. Place the CO call on hold and dial the Transfer to Trunk Ring Group code.
You will hear a conrmation tone.
2. Hang up.
The call rings over the External Paging, enabling anyone to answer the call.