Tandem Trunking (Unsupervised Conference)
556 Features Aspire Software Manual
Method D - Automatic Tandem Trunking Using Abbreviated Dialing
To set Automatic Tandem Trunking:
1. Dial service code 833.
2. Dial the desired trunk number (Aspire S: 1-8, Aspire: 001-200).
3. Hang up.
The line key for the trunk will be solid red as long as the Unsupervised Conference
continues.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9
plus the trunk number + *3).
To cancel Automatic Tandem Trunking:
1. Dial service code 834.
2. Dial the desired trunk number (Aspire S: 1-8, Aspire: 001-200).
3. Hang up.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9
plus the trunk number + *3).
To set and change the destination of the Automatic Tandem Trunk call:
1. Dial service code 835.
2. Dial the desired trunk number (Aspire S: 1-8, Aspire: 001-200).
3. Dial the desired time mode (Aspire S: 1-4, Aspire: 1-8).
4. Press HOLD.
5. Hang up.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9
plus the trunk number + *3).
Continue/Disconnect Code
To use the Continue code to extend a Tandem Trunk call:
1. An external call connects to an external number (either by transferring with Tandem Trunking
or by DISA caller).
2. After the programmed time (Program 24-02-07), a warning tone is heard and the user dials the
Continue code (Program 20-28-01) to extend the conversation.
3. After the programmed time (Program 20-28-03), the warning tone is heard again. After the
programmed time (Program 24-02-10), the call is disconnected.