Program 84 : Hardware Setup for VoIP
84-06 : VOIPU Setup
1454 ◆Programming Aspire Software Manual
84-06 : VOIPU Setup
Description
Use Program 84-06 : VOIPU Setup to setup the details of VOIPU PCB.
Input Data
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
• Items 13 and 14 available. • Items 13 and 14 available with software
1.18+. Requires VOIPU PCB firmware
3.2+.
SLOT Number 01-16
Item
No. Item Input Data Default Description
01 RTP Port Number 0-65535 10020
02 RTCP Port Number RTP Port Number + 1 10021 It has to be RTP Port Number + 1.
03 H.245 Port Number 0-65535 10100
04 Fractlost Threshold 0-4294967295 ms 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
05 Packets Lost Threshold 0-4294967295 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
06 Ext High Sequence
Threshold 0-4294967295 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
07 Jitter Threshold 0-4294967295 sec 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
08 Last LSR Threshold 0-4294967295 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
09 Delay LSR Threshold 0-4294967295 0 The data will be sent to the NTCPU if the
value exceeds the defined value.
10 DTMF Behavior 0 = DTMF Relay disabled
1 = In-Band DTMF relay,
do NOT report to Host
processor
2 = Out of Band DTMF
relay, do not pass tones as
voice
0 • Inbound - DTMF is transferred by
RTP packets.
• Outbound - DTMF is transferred by
H.245 protocol.
11 Ready/Ready-Answer
Port Number 0-65535 4000