Pulse to Tone Conversion
484 ◆Features Aspire Software Manual
Pulse to Tone Conversion
Description
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user
change their extension’s dialing mode while placing a call. For systems in a Dial Pulse area, this
permits users to access dial-up OCCs (such as MCI) from their DP area. The user can, for example:
●Place a call to an OCC over a DP trunk.
●Depending on programming:
Manually implement Pulse to Tone Conversion
OR
Wait 10 seconds.
●Dial the OCC security code and desired number. The system dials the digits after the conver-
sion as DTMF.
Conditions
Pulse to Tone Conversion is only valid for Dial Pulse trunks (Program14-02-01, options 0 or 1).
Default Setting
Enabled.

Programming

➻14-02-07 : Analog Trunk Data Setup - DP to DTMF Conversion Options
For each trunk, set the type of DP to DTMF Conversion required: automatic (0), automatic
and manual (1), or manual (2).
Related Features
Central Office Calls, Placing
Other programmed options for outgoing calls can affect how a call is placed. Check or pro-
gram these options as needed.
Operation
To convert your phone’s dialing to tone after placing your call on a pulse line:
1. Place call over pulse line.
2. Dial # to switch the DP trunk to DTMF dialing.
Aspire S Aspire M/L/XL
• Available. • Available.