Program 10 : System Configuration Setup
10-12 : NTCPU Network Setup
Aspire Software Manual Programming ◆747
10-12 : NTCPU Network Setup
Description
Use Program 10-12 : NTCPU Network Setup to setup the IP Address, Subnet-Mask, and Default
Gateway addresses.
Input Data
Level: Aspire S Aspire M/L/XL
SA • Available. • Available.
Item
No. Item Input Data Default Conditions
01 IP Address 1.0.0.1 ~ 126.255.255.254
128.1.0.1 -191.254.255.254
192.0.1.1 ~ 223.255.254.254
172.16.0.10
02 Subnet
Mask 128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
224.0.0.0
252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
255.255.0.0 The setting of Sub-
net-Mask is mistaken
when all Host Address
are 0.
If the network section
is:
0,
127
128.0
191.255
192.0.0
223.255.255
The setting of Sub-
net-Mask is mistaken.
03 Default
Gateway 1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
0.0.0.0 IP Address for Router
04 Time Zone -12 thru +12 Hours +9 Hours Enter the difference for
standard time.
05 NIC 0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
0 NIC Auto Negotiate